Msg # 1710 Type:B Stat:$ To: ERRORS@NVPNET From: PI8NVP Date: 09-Jul/1417 Subject: IBM foutcodes (nooit nodig?) Bulletin ID: PI8NVP_9656 Path: PI8NVP This is a listing of the error codes for the IBM PC. ---------------------------------------------------------------------- CODES Description ----- ------------------------------------------------ 101 Main system board failed. 109 Direct memory access test error 121 Unexpected hardware interrupts occurred. 131 Cassette wrap test failed. 199 User indicated configuration not correct. 201 Memory test failed 301 Keboard did not respond to software reset correctly or a stuck key failure was detected. If a stuck key was detected, the scan code for the key is displayed. 302 User indicated error from the keyboard test. 401 Monochrome memory test, horizontal sync frequency test, or video test failed. 408 User indicated display attributes failure. 416 User indicated character set failure. 424 User indicated 80X25 mode failure. 432 Parallel port test failed ( monochrome adapter ). 501 Color memory test failed, horizontal sync frequency test, or video test failed. 508 User indicated display attribute failure. 516 User indicated character set failure. 524 User indicated 80x25 mode failure. 532 User indicated 40x25 mode failure. 540 User indicated 320x200 graphics mode failure. 548 User indicated 640x200 graphics mode failure. 601 Diskette power on diagnostics test failed. 602 Diskette test failed 606 Diskette verify function failed. 607 Write protected diskette. 608 Bad command diskette status returned. 610 Diskette initialization failed. 611 Timeout - diskette status returned. 612 bad NEC - diskette status returned. 613 Bad DMA - diskette status returned. 621 Bad seek - diskette status returned. 622 Bad CRC - diskette status returned. 623 Record not found - diskette status returned. 624 Bad address mark - diskette status returned. 625 Bad NEC seek - diskette status returned. 626 Diskette data compare error. 7xx 8087 math coprocessor 901 Parallel printer adapter test failed. 10xx Reserved for parallel printer adapter. 1101 Asynchronous communications adapter test failed. 1201 Alternate Asynchronous communications adapter test failed. 1301 Game control adapter test failed. 1302 Joystick test failed. 1401 Printer test failed. 15xx Sdlc communications adapter errors. 1510 8255 port B failure. 1511 8255 port A failure. 1512 8255 prot C failure. 1513 8253 timer 1 did not reach terminal count. 1514 8253 timer 1 stuck on. 1515 8253 timer 0 did not reach terminal count. 1516 8253 timer 0 stuck on. 1517 8253 timer 2 did not reach terminal count. 1518 8253 timer 2 stuck on. 1519 8273 port B error. 1520 8273 port A error. 1521 8273 command/read timeout. 1522 Interrupt level 4 failure. 1523 Ring Indicate stuck on. 1524 Receive clock stuck on. 1525 Transmit clock stuck on. 1526 Test indicate stuck on. 1527 Ring indicate not on. 1528 Receive clock not on. 1529 Transmit clock not on. 1530 Test indicate not on. 1531 Data set ready not on. 1532 Carrier detect not on. 1533 Clear to send not on. 1534 Data set ready stuck on. 1536 Clear to send stuck on. 1537 Level 3 interrupt failure. 1538 Receive interrupt results error. 1539 Wrap data miscompare. 1540 DMA channel 1 error. 1541 DMA channel 1 error. 1542 Error in 8273 error checking or status reporting. 1547 Stray interrupt level 4 1548 Stray interrupt level 3 1549 Interrupt presentation sequence timeout. 17xx Fixed Disk errors. 1701 Fixed disk Post error. 1702 Fixed disk adapter error. 1703 Fixed disk drive error 1704 Fixed disk adapter or drive error. 18xx I/O Expansion unit errors. 1801 I/O Expansion unit POST error. 1810 Enable/Disable failure. 1811 Extender card wrap test failed (disabled). 1812 High order addtess lines failure (disabled). 1813 Wait state failure (disabled). 1814 Enable/Diaable could not be set on. 1815 Wait state failure (enabled). 1816 Extender card wrap test failed (enabled). 1817 High order adress lines failure (enabled). 1818 Disable not functioning 1819 Wait request switch not set correctly 1820 Receiver card wrap test failure 1821 Receiver high order address lines failure 20xx Bisync communications adapter errors 2010 8255 port a failure 2011 8255 port b failure 2012 8255 port c failure 2013 8253 timer 1 did not reach terminal count 2014 8253 timer 1 stuck on 2016 8253 timer 2 did not reach terminal count or timer 2 stuck on. 2017 8251 Data set ready failed to come on 2018 8251 Clear to send not sensed 2019 8251 Data set ready stuck on 2020 8251 Clear to send stuck on 2021 8251 hardware reset failed 2022 8251 software reset failed 2023 8251 software "error reset" failed 2024 8251 transmit ready did not come on 2025 8251 receive ready did not come on 2026 8251 could not force "overrun" error status 2027 Interrupt failure-no timer interrupt 2028 Interrupt failure-transmit, replace card or planar 2029 Interrupt failure-transmit, replace card 2030 Interrupt failure-receive, replace card or planar 2031 Interrupt failure-receive, replace card 2033 Ring indicate stuck on 2034 Receive clock stuck on 2035 Transmit clock stuck on 2036 Test indicate stuck on 2037 Ring indicate stuck on 2038 Receive clock not on 2039 Transmit clock not on 2040 Test incicate not on 2041 Data set ready not on 2042 Carrier detect not on 2043 Clear to send not on 2044 Data set ready stuck on 2045 Carrier detect stuck on 2046 Clear to send stuck on 2047 Unexpected transmit interrupt 2048 Unexpected receive interrupt 2049 Transmit data did not equal receive data 2050 8251 detected overrun error 2051 Lost data set ready during data wrap 2052 Receive timeout during data wrap 21xx Alternate bisync communications adapter errors 2110 8255 port a failure 2111 8255 port b failure 2112 8255 port c failure 2113 8253 timer 1 did not reach terminal count 2114 8253 timer 1 stuck on 2116 8253 timer 2 did not reach terminal count or 2117 8251 Date set ready failed to come on 2117 8251 Clear to send not sensed 2118 8251 Data set ready stuck on 2119 8251 Clear to send stuck on 2120 8251 hardware reset failed 2121 8251 software reset failed 2122 8251 software "error reset" failed 2123 8251 transmit ready did not come on 2124 8251 receive ready did not come on 2125 8251 could not force "overrun" error status 2126 Interrupt failure-no timer interrupt 2128 Interrupt failure-transmit, replace card or 2129 Interrupt failure-transmit, replace card 2130 Interrupt failure-receive, replace card or planar 2131 Interrupt failure-receive, replace card 2133 Ring indicate stuck on 2134 Receive clock stuck on 2135 Transmit clock stuck on 2136 Test indicate stuck on 2137 Ring indicate stuck on 2138 Receive clock not on 2139 Transmit clock not on 2140 Test indicate not on 2142 Data set ready not on 2142 Carrier detect not on 2143 Clear to send not on 2144 Data set ready stuck on 2145 Carrier detect stuck on 2146 Clear to send stuck on 2147 Unexpected transmit interrupt 2148 Unexpected receive interrupt 2149 Transmit data did not equal receive data 2150 8251 detected overrun error 2151 Lost data set ready during data wrap 2152 Receive timeout during data wrap ----------------------------------------------------------------------------- For 201 Error Codes: 0yzz = 1st 64K bank (000-064K) 5yzz = 6th 64K bank (320-384K) 1yzz = 2nd 64K bank (064-128K) 6yzz = 7th 64K bank (384-448K) 2yzz = 3rd 64K bank (128-192K) 7yzz = 8th 64K bank (448-512K) 3yzz = 4th 64K bank (192-256K) 8yzz = 9th 64K bank (512-576K) 4yzz = 5th 64K bank (256-320K) 9yzz =10th 64K bank (576-640K) The "zz" code gives the bad data bit (individual chip): xy00 = parity bit xy10 = data bit 4 xy01 = data bit 0 xy20 = data bit 5 xy02 = data bit 1 xy40 = data bit 6 xy04 = data bit 2 xy80 = data bit 7 xy08 = data bit 3 xyAA = empty bank - check switches xyFF = empty bank - check switches For example, the error code 4810 201 would be interpreted: 4 = 5th 64K bank ( if the motherboard had 256K installed, then the 5th bank is the first on an expansion board ) 8 = don't care ( applies only to 16-64K PC-I motherboards ) 10 = data bit 4 ( fifth chip after the parity chip ) ----------------------------------------------------------------------------- For PC Network Adapter Error Codes: 30xx Primary PC Network Adapter Error 3001 CPU Failure 3002 ROM Failure 3003 ID Failure 3004 RAM Failure 3005 HIC Failure 3006 +/- 12v Failed 3007 Digital Loopback Failure 3008 Host Detected HIC Failure 3009 Sync Fail & No Go Bit 3010 HIC Test OK & No Go Bit 3011 Go Bit & No CMD 41 3012 Card not present 3013 Digital Failure ( Fall Thru ) 3015 Analog Failure 3041 Hot Carrier (not this card) 3042 Hot Carrier (THIS CARD !!) 31xx Secondary Network Adapter Error 3101 CPU Failure 3102 ROM Failure 3103 ID Failure 3104 RAM Failure 3105 HIC Failure 3106 +/- 12v FkIZ5R|3107 Digital Loopback Failure 3108 Host Detected HIC Failure 3109 ???? & No Go Bit 3110 HIC Test OK & No Go Bit 3111 Go Bit & No CMD 41 3112 Card not present 3113 Digital Failure ( Fall Thru ) 3115 Analog Failure 3141 Hot Carrier (not this card) 3142 Hot Carrier (THIS CARD !!) ----------------------------------------------------------------------------- ~rAudio Error Codes: Beeps Failure ========================================== No display and No beeps Power Continuous Beep Power Repeating Short beeps Power 1 long and 2 short beeps Display 1 short beep Display 1 long and 3 short beeps EGA All personal computer error codes for the diagnostic and advanced diagnostic package are represented with the device number followed by two digits other than 00. The device number plus 00 represents successful completion of the test. PA3APN BBS (B,D,H,I,J,K,L,N,R,S,T,U,V,W,X,Y,?) >