Subject: Tiny2 1.1.6 command sheet From: G8CCV@GB7AAA I have quickly updated the 1.1.5 command sheet that was flooded round the system sometime ago. Can't remember who sent it, but thanks anyway for the original. I accept no responsiblity for errors and omissions, please feel free to correct and update. A happy new year to all my readers!! Bye Bye. De Mick COMMANDS FOR THE TINY2 PACKET TNC 1.1.6 SOFTWARE ================================================== Command Argument Default Description (based on the default condition) ------- -------- ------- ----------- -------------------------------- 3rdparty on(y)/off(n) off Selects whether 3rd party messages are accepted 8bitconv on/off off Pass or strip high order bit in converse mode AMonth on/off off On=all system dates in alphabetic format AUtolf on/off on Select sending linefeed after each carr return AWlen n=7-8 7 Number of bits in each byte sent to terminal Ax25l2v2 on/off on Select version 1 or 2 of AX25 protocol AXDelay n=0-180 0 Extra keyup delay for voice repeater (n*100mS) AXHang n=0-20 0 Voice repeater hang time (n* 100mS) BBSMSG on/off off Primarly used for host operation Beacon E/A n=0-250 E0 Beacon period and mode (every/after n* 10s) BKondel on/off on Delete key (BS SP BS on , or \ off) BText text blank Text sent as beacon (120 characters max) BUdlist on/off off Treat LCALLS as only stations to monitor CALibra SP D K Q Calibrate mode high low toggle tones ,quit CALSet n=0-65335 none Sets the value for CALibrate CANline n=0-$7F $18 (^X) Sets the cancel line character CANPac n=0-$7F $19 (^Y) Sets the cancel packet character CBell on/off off Enable / disable connect bell CHeck n=0-250 30 Connection timer value (n* 10s) CLKadj n=0-65335 0 Real time clock adjustment (slows clock) CMdtime n=0-255 1 Transparent mode timout value CMSg on/off off Enable / disable connect message CMSGDisc on/off off Enable / disable forced disconnect after mess. COMmand n=0-$7F $03 (^C) Escape character from converse to command mode CONMode CONV/TRANS CONV Mode to enter after connection Connect call string none Connect to station via optional repeaters CONOk on/off on Allow connections to your tnc CONPerm on/off off Select temporary or permanent connection CONStamp on/off off Select printing of date & time on connect mess CPactime on/off off Enable/disable timed packet despatch (convers) CR on/off on Append a carriage return to each packet CText text blank Connect message text (120 characters max) CWid E/A n=0-250 E0 CWID period and mode (every/after n*100s) CWLen ???? 6 Speed of CWID ???? CWTgl on/off off ???? DAytime yymmddhhmm none Set or display date and time DAYUsa on/off on print date as mm/dd/yy instead of dd-mm-yy DELete on/off off select delete character ($08 off $7F on) DIGipeat on/off on Enable/disable digipeater function Disconne none Disconnect DISPlay none,A,C,H,I,L,M,T Display all/async/char/health/id/monitor/timin DWait n=0-250 16 Extra delay for digipeaters (n* 10mS) Echo on/off on Echo characters typed EScape on/off off Escape character ($1B on $24 off) Flow on/off on Inhibit output to terminal whilst typing FRack n=1-15 3 Time to wait for acknowledgment FUlldup on/off off Select simplex or duplex mode HEaderln on/off off Print header and text on same or seperate line HEAlled on/off off Normal or software monitoring CON & STA leds HId on/off off Enable/disable ID packet every 9.5 minutes Id none Force an ID packet K none Enter converse mode from command mode KIss on/off off TNC will operate in KISS mode after RESTART LCAlls call 1-8 blank List of calls to receive or ignore LCok on/off on Enable/disable lower to upper case conversion LCStream on/off on Allow/disallow Stream ID chr to be lower case LFadd on/off off Add a linefeed after each carriage return LFIgnore on/off off Filter out embedded linefeed characters MAXframe n=1-7 4 Number of outstanding frames allowed MAll on/off on Monitor connected as well as unproto frames MCOM on/off off Select Data or all frames to be monitored MCON on/off off Do/do not monitor frames when connected MFilter n=0-$7F blank Up to 4 chrs to be filtered from monit'd data MHClear none Clear the calls heard list MHeard none Display calls heard (with date & time) Monitor on/off on Monitor mode on MRpt on/off on Display digipeater path of monitored stations MStamp on/off off Select time stamping of monitored frames MYAlias call [-n] blank Alternative station identifier MYcall call [-n] NOCALL Station callsign for ID and linking MYPcall call-n MYPCALL Station callsign for Personal Message System NEwmode on/off off Select changing modes as TNC1 NOmode on/off off Allow/Disallow explicit mode change only NUcr on/off off Send nulls ($00) after carriage return NULf on/off off Send nulls ($00) after linefeed NULLs n=0-30 0 Number of nulls to send if enabled Paclen n=0-255 128 Number of bytes of data in each packet PACTime E/A n=0-250 A 10 Trans mode packet despatch timer (n* 100mS) PARity n=0-3 3 Parity 0=none 1=odd 2=none 3=even PASs n=0-$7F $16 (^V) Character which allows any char to be sent PASSAll on/off off Accept only packets with valid crc's or all PErsist n=0-255 127 Probablity of resending frame after collision PIdcheck on(y)/off(n) off On=accept only F0 frames off=accept all PMS on(y)/off(n) off On=Personal Message System is enabled PPersist on(y)/off(n) off On=P Persistance retry instead of FRACK timing RECOnnect call string none Restablish a link via a new path REDisplay n=0-$7F $12 (^R) Character to print the current input buffer RESET none Reset the TNC to default parameters RESptime n=0-250 5 Delay before sending ack (n* 100mS) RESTART none Reset the TNC but keep existing parameters REtry n=0-15 10 Maximum number of retries (0=forever) RXblock on/off off Format TNC data for computer processing Screenln n=0-255 80 Number of characters per line SENDPac n=0-$7F $0D (CR) Character which forces frame to be sent SLottime n=0-255 1 Delay length of Persist random timer (n*10mS) STArt n=0-$7F $11 (^Q) Character for XON (allows data flow) STATus ???? $00 ???? STOp n=0-$7F $13 (^S) Character for XOFF (stops data flow) STREAMCa on/off off Show/dont show the callsign after stream ID STREAMDbl on/off off Print stream switch character once/twice STReamsw n=0-$FF $7C (|) Character to change streams TRACe on/off off Hexadecimal trace mode on/off Trans none Command to enter transparent mode TRFlow on/off off Disable flow control to terminal (trans mode) TRIes n=0-15 none Set or display current retry counter TXdelay n=0-120 30 Keying delay for transmitter (n* 10mS) TXFlow on/off off Disable flow control to TNC (trans mode) TXUIfram on(y)/off(n) on On=unproto frames may be transmitted Unproto call string CQ Path and address to send unconnected packet USers n=0-10 1 Number of streams allowed Xflow on/off on XON/XOFF flow control instead of RTS/CTS XMitok on/off on Allow/disallow the transmitter to be keyed XOff n=0-$7F $13 (^S) Character to stop data flow from terminal XON n=0-$7F $11 (^Q) Character to start data flow from terminal Note :- The Upper case part of the command is the minimum that will be accepted Call string = Callsign [-n] [VIA Callsign [-n] [VIA Callsign [-n]]]