Linksys, A division of Cisco Systems, Inc.

Product:                WAG54G version 2 Annex A (European)

Release Date:		September 18, 2005

Classification:         Firmware Release History (European versions only)

NOTE:  Not for use with Annex B models (E1 and DE) or previous versions 
of the WAG54G, English only firmware.

Disconnect all wireless clients from the gateway during the upgrade process.  
Make sure no wireless clients attempt to associate with the gateway until 
the upgrade process is complete.

__________________________________________________________________________

Firmware version 1.01.15
- Fixed error messages that display for PPP authentication and other GUI 
  issues not allowing to save settings
- Fixed RFC1483 Bridged failure to connect when set to static WAN IP
- Fixed VPN issues with passing traffic under PPPoA; IPSec Tunnel 
  crashing after 2~4 hours; Gateway not re-establishing connection
- Fixed PPTP Pass-through  
- Added “:” as an acceptable character for PPP password 
- Added modulation selection for DSL 
- Allowed WAN IP to be the same as Gateway IP for RFC1483 Bridged Static mode 
- Fixed DHCP server not responding after the LAN IP is changed to different 
  a subnet 
- Fixed problem with settings PPPOA MTU value to 1500 under manual mode 
- Fixed problems with GUI setting changes done using HTTPS remote-management 
- Fixed WLAN performance issue when logging is enabled

Firmware Version 1.00.19
- Initial release