## WAG54G_config

#= Linksys Wireless Access (ADSL) Gateway 


Factory reset = 10 sec. reset button


* DOC:

http://interhell.co.uk/forums/topic/257003-set-up-a-linksys-wag54gs-as-a-wireless-access-point/

http://forums.whirlpool.net.au/archive/618810


http://www.linksysinfo.org/index.php?threads/wag54g-as-an-access-point-only.18678/
1. connect PC to WAG54 and log into config
2. change WAG IP to something in IP range of the primary ADSL router, but outside its DHCP range eg. 192.168.1.250 - this is so that you can at a later time access the WAG from any network client to make changes to wireless settings.
3. disable DHCP in WAG. Check you are happy with wireless settings.
4. connect WAG to ADSL router (LAN port to LAN port)
5. Done


DHCP-Fritx!Box = 192.168.178.20 - .100

2. = 192.168.178.4




Niet echt goed te gebruiken als WAP


0)  Beperkt in de DSL-router de DHCP-lease (.32-100)


Factory reset: > 10 sec. RESET-button

Verbinden met 192.168.1.1
Username/password = admin/admin

Set in 0 fases

1) Wireless > Basic Wireless Setting : SSID=agrarix11
[Save Settings]

Opnieuw verbinden met 192.168.1.1

2)
Wireless > Wireless Security : 
  Enable
  Mode = WPA Pre-Shared Key
  Key = DeEersteEtage
[Save Settings]


Opnieuw verbinden met 192.168.1.1


3)

Setup > Basic Setup
Service Name = 3x admin (anders werkt [Save] niet)

Local IP Address = 192.168.178.1 (adres van lokale DSL-router)

Local DHCP Server = Enable
Starting IP Address:	 192.168.1.101
Maximum Number of  DHCP Users = 100

Time Zone = GMT+1

[Save Settings]


Nu kan er GEEN verbinding meer gemaakt worden met de WAG.
Anders dan de factory reset.




-.-