ds/16/11/2000/2.62 - / Dynalink ISDN cards / 95 /98 /NT *news* Releasenotes: 2.62 FALL Edition These drivers are suitable for: IS64PH (2 Siemens chipset ISA) IS64PH (1 Siemens chipset ISA) IS64PH-AN (analogue port ISA) IS64PPH (Winbond chipset PCI) IS128PH (Winbond chipset PCI) IS128AH (Winbond chipset PCI with analogue port) IS128C (PCMCIA CARD) Other new hardware releases will follow ******************************************************************************* * 2.62 - DRIVER RELEASE DYNALINK IS64PH/PPH/PH-AN/IS128AH FOR WINDOWS * * and IS128PH * * Please give commands suggestions to our support !!! * * E-mail: isdn@dynalink.com * * * * If you have any tools which are suitable for our ISDN adapters, Please * * Send them to us. If it is giving extra features to our card, than we * * will release it through our webpages, Please send it to isdn@dynalink.com * * Up-2-date:31-11-99, Dennis Slagers * * Direct Support Dynalink: 0900-2024006 (fl 1.-- p/m) * ******************************************************************************* ** ONLY WITH YOUR COMMENTS WE CAN IMPROVE OUR DRIVERS. SO PLEASE SEND YOUR ** SUGGESTIONS AND TIPS AND QUESTIONS TO ISDN@DYNALINK.COM ----------------------------------------- Version 2.62 (revised version 16-11-2000) * Noticed bug when installing ISA card with older 2.62 drivers. New Compiled Drivers solved problem. Version 2.62 (3rd update / Fall Release) We discovered a bug in the VxD driver regarding the CallingParty When dialing out with ISDNLine0 CallingParty 1 was used When dialing out with ISDNLine1 CallingParty 1 was also used. Should be CallingParty 2 (When dialing out with the Ndiswan Miniport the file IINWAN95.SYS has been updated in this release. Valid for VxD driver Win95 / Win98 Version 2.62 (fall release version) 1. fixed: bug in BAP CALL REQ received 2. Added: Callback function for MLPPP functionality Version 2.61 (Release with AO/DI support) This functionality has been tested at KPN research facility (only incoming AO/DI calls) for more info check: AODI-INF.TXT 1. Added: BACP protocol for MLPPP 2. Added: AO/DI (Always On Dynamic ISDN) 3. Changed: default value of ATS55 and ATS57 from 10%~90% to 1~100% 4. Changed: default value of ATS56 and ATS58 from 5 sec~1200 sec to 1 sec~1200 sec. 5. Fixed: CHAP problem for AODI callback function 6. added: CAPI supplementary service 7. add CBCP protocol for MLPPP service Version 2.55 (not released, only NT add function) 1. Add CAPI supplementary service Version 2.54 (not released) 1. Solved: the DISCONNECT-IND problem for application 'Display Call 2. Fixed: problem of MANUFACTURER_NDIS_UNINSTALL definition which did not match between IINWAN95.SYS and IIN100.VXD 4. added: InfoMask bit 10 (redirecting / redirection message) for CAPI 5. Fixed: CBCP (0xc029) protocol problem Version 2.53 (Win98 / Win95 Millenium Update) HAPPY MILLENIUM ! By Dennis Slagers 1. Finalized UUD functionality. Working and fully compatible according the specifications. 2. Improvement of CAPI messages (return error code, ring detection etc). This will give you more and better results with 3rd party CAPI applications like ISDNCid. Thanks to Gunnar Woldmo for testing all this. 3. Fix for INCOMING DATA calls and MSN numbers when using NDIS Wan Miniports Calls were rejected when you entered MSN numbers in dialogbox. For people who read the release notes: Simple update? Copy IIN100.VXD in C:\Windows\System and reboot Version 2.53 (Win95/Win98/WinNT 09-12-99) updated version Editor: Dennis Slagers 1. Improved drivers for UUD Win95/98/NT 2. Improved stability of driver for Win95/98/NT 3. A TIP for those who read this: For this version you are allowed to copy the file IIN100.SYS or IIN100.VXD to your system and overwrite the old file if the driver is 2.49 or higher. Reboot your system and your ISDN drivers have been updated. Version 2.53 (released 31-11-99) Editor: Dennis Slagers 1. Minor updates and improvements 2. Add SWEEP.EXE into distribution: SWEEP.EXE is replacement for IINCLEAN.EXE. SWEEP.EXE is Windows utility for cleaning the ISDN card drivers and registry settings under Win95/Win98 Be noticed: it is possible that 1 driver is left behind: please delete this manually: driver in \Windows\Inf\Other which is related to the ISDN card can be left behind and is not deleted by SWEEP.EXE, please delete this yourself when de-installing the ISDN card 3. Upon request of many customers: LOG32.EXE will show the icon into your systemtray again. (ISDN line activity and logfile functionality) 4. Change of INF structure. No typenumbers are displayed anymore. Due to change of commercial typenumber(s) in future. Version 2.52 (not released) Editor: Dennis Slagers 1. Fix the MRRU problem in PPP protocol 2. Solve the install problem for the motherboard which is using INTEL 810E chipset (cannot find BUS number) Version 2.51 (not released) 1. Fix a bug for connection fail on V.120 / X.75 Version 2.50 (not released) 1. Add AT commands for ML-PPP BOD mode ATS55=50 data flow for B-channel connected, unit is percentage ATS56=10 duration for B-channel connected, unit is seconds ATS57=20 data flow for B-channel disconnected, unit is percentage ATS58=30 duration for B-channel disconnected, unit is seconds 2. Fix the IO/IRQ problem in GateByte BX dual mainboard Version 2.49 (released 04-08-1999) - Some minor improvements made no further details available Version 2.48 (not released) Version 2.47 (released 02-07-1999) Release for Windows 95, Windows 98, Windows NT by Dennis Slagers 1. Resume the item 1 in version 2.46 (95,98,NT4.0) Version 2.46 (never released) By Dennis Slagers 1. Modify layer2 manager for response the first TEI-ID-CHECK request only (95/98/NT4.0) 2. fix the linetest.exe (through capi2016) problem (95/98) 3. fix the problem of using the same ISDN COM port for two Dialup networking application (95,98) Version 2.45 29/03/99 By Dennis Slagers 1. Add CAPI EarlyB3Connect feature (95,98,NT4.0) 2. Change the Idle pattern 0xAA for A-law and 0xFF for u-Law (Win95,98,NT4.0) 3. Disconnect slave link of ML-PPP when Data-Only card receive incoming voice call. Version 2.44 (not released) By Dennis Slagers 1. Fix the problem of IRQ conflict with SB card (Win98) 2. Fix the problem of confirmation tone cannot be heard (Win95,98,NT4.0) Version 2.43 (not released) By Dennis Slagers 1. Provide new parameters for ATD command such as ATDYaNb# Where Y is 'Type of number' N is 'Numbering plan identification' and # is the 'Telephone number' a = 0 unknown (default) 1 international number 2 national number 3 network specific number 4 subscriber number 6 abbreviated number b = 0 unknown (default) 1 ISDN/Telephony numbering plan 3 data number plan 4 telex numbering plan 8 national standard numbering plan 9 private numbering plan 2. Fix sleep mode active problem when data transmitting (Win98) 3. Fix Vcomm application can not establish connection when sleep mode active Version 2.42 (released 08-02-99) By Dennis Slagers 1. Fix the sleep modem problem (98) 2. Fix the PCI I/O invalid problem (NT) 3. Fix the PCI IRQ share problem with some SCSI PCI cards (NT 4.0) News for 2.41 (not released) By Dennis Slagers * Fix the checking method of PAP indentification of MLPPP (95,98) * fix the CAPI interface for a specific program (NT) * fix ISA wakeup CSN problem when sound card exists (NT) News for 2.40 (not released) By Dennis Slagers * Fix High Layer Compatibility I.E. Sending problem (95,98,NT) * Fix POTS always ring problem (when incoming call and POTS no answer if remote user disconnect this call then POTS can not stop ring). (95,98,NT) * Modify cause value in RLEASE COMPLETE packet when MSN or SAD is not matched (95,98,NT) News for 2.39 By Dennis Slagers * Fixed IRQ self-test failure problem for ISDN PCI (Cologne and Winbond chipset) (95,98,NT) * Increase the buffer number to handle more and better incoming packets in 128K mode for better reliability (95,98) * Fixed a bug when you want to access the virtual comport and you will receive an error in the first time after the installation (98) News for 2.37 By Dennis Slagers * Provide the Point to Point ISDN connection, this can be configured in the property of the ISDN card. Also with the TEI value (95,98) * Provide a way to configure the X.25 TEI value. This value can be configured in the property of the ISDN card (95,95) * Fixed a bug in our MLPPP mode when the TA is communicating with a DIGI PCIMAC 4ST board in TCP/IP compression ON condition (95,98) News for 2.36 [never public/beta released. Only internally] * Fixed a bug for Pots interface (95,98,NT) * After several request: fixed the ISDN port name. (ndis / iinwan) (95,98) * Add the CHAP function into ML-PPP (95,98) News for 2.35 (Released as 2.34 rev 2) By Dennis Slagers * Improvement of the CAPI state diagram protection. (solve the unconditional case). (95,98,NT) * Improvement of the COMport state protection (solve the unconditional case) (95,98) * Fixed a bug of AT&ZO command when the parameters are MSN and subaddress (95,98) * fixed a bug of AT&ZI command when parameters are MSN with subaddress (95,98) * new LOG32.exe program generating an icon in the systemtray, it shows the ISDN D, B1 and B2 active status (95,98,NT) * fixed a bug when sharing same IRQ with USB (valid for win95,98,NT) * fixed a bug (VxD) when install the RVSCOM-lite in Win98 (Vcomm) * fixed a bug when open two comports and change the protocol for each port (98 vxd) News for 2.34 By Dennis Slagers * Fixed a bug occurred in 2.32, 2.33 in NT (receiving incoming bit transparent data strings). * Improve the buffer managment for more reliability in MLPPP mode * Still testing stability for NT. (Please send us input). * Fixed IRQ sharing problem with USB devices (motherboards) for IS64PPH News for 2.33 17-09-98 By Dennis Slagers * Some minor improvements. Customers have reported problems with linetest These drivers are solving this. This is an officieal release. * Fixed a bug. ISDN card cannot be found in NT 4.0 with PII-300MHz or higher speed CPU * For Windows 98 you can try the WDM driver 3.0 Which is also supporting multiple Dynalink ISDN cards. * New manual is in preparation News for 2.32 Edited by Dennis Slagers * Fixed: a bug in MLPPP class 0 mode (win95/98) * Fixed: a bug when ringing the IS64PH-AN * Fixed: a bug when set the ATB20 (V.120) and then AT&E0, than the linespeed would be still 56K (win31) * Fixed: a bug of returned string when use the Universal-1 with ATB41 in the extra settings field and Universal-2 with ATB4 to connect The Internet. The display string should be 128000 not 256000 (Win95/98) * Increased the number of buffers for LAPD in V.120 and X.75 to improve the transmission rate in PPP mode over V.120 or X.75 (Win95/98) * The AT command set, ATB6 is used for PPP over V.120 and ATB7 is used for PPP over X.75 series (win95/98) * Improvement of the ML-PPP+BOD function (Win95/98) --> Please test this feature! * Let the u_Law characters be seen for Windows in different languages (win95/98/nt) * Fix the inconsistent data type in the program and registry for standbytime * HINT: for de-installing the card and to install the drivers again, please use the IMPROVED: IINCLEAN.EXE! News for 2.30 Edited By Dennis Slagers Version 2.30 is a major new release with a lot of new functionality which we will describe. For more the history see below the notes for version 2.30. For Windows NT systems, the Dynalink drivers supports multi-processor platform, this is not longer beta anymore. It can benefit the powerful users running Dynalink's IS64PH / IS64PH-An internal cards on the multi-processors NT system. Alpha systems do not run. There are several new and innovative features provided in for Windows 3.1, Windows 95 and 98 systems. More easy installation, and control your time and costs. 1. For Win95/Win98, the Multilink PPP (128K) is being accessed through our virtual modem (Dynalink Internet MLPPP modem). The customer does not need to install the MSISDN 1.1 (Microsoft ISDN Accelerator Pack 1.1) or DUN 1.2 (Dialup Networking version 1.2) for adding the secondary device to achieve the 128K Internet Access. 2. In the Win95/98 systems, the Multilink PPP+BOD (Bandwith on Demand) (128K) does also not need MSISDN 1.1. or DUN 1.2. In this case it has even the Bandwith-on-Demand function. This means that the bandwith (64K or 128K) will be depend on the data traffic and incoming/outgoing voice call. In the beginning stage, it will establish 1 B Data Channel (64K) and will only add a second B Data Channel when the data traffic is going over the specified value (refer to ATS53=x). (only when there is a second channel available). Once it is in ML-PPP mode (128K) it can drop 1 B channel based on three conditions. a. The average data traffic is lower thatn the value (ATS53=x) in a specific time period (ATS54=x). b. The customer wants to make a outgoing voice call such as picking up the handset (IS64PH-AN). c. There is an incoming voice call, the analog telephone device will have a ring signal. With this BOD function, you will have more flexibility to handle voice and data simultaneously. Important: this will only work when you have an extra service activated at your local PTT. For Dutch customers: they call it: 'Dienst Wisselgesprek/Bereikbaarheid'. You have to ask for it for 'ALL MSN's'. 3. In this driver we provide als PPP, ML-PPP and BOD over X.75 Protocol functions. If your ISP or RAS server provides these kind of function, please select the virtual modem from the modem INF file which we provide. Then it is more easy to configure and make a connection with your ISP or RAS server. 4. Inactivity Setting In this driver we provide the ATS30=n command. This tells the driver to disconnect the active connection automatically if there is no data traffic for x * 10 seconds How to configure the ISDN driver for the above mentioned functions? 1. First you have to install the modem driver to the COM5 or COM6 which are available. In the total list you see a number of modems which you can select. Select the one which meets your ISP or RAS server requirements and select the ISDN comport to use with this modem. |-----------------------------------------------------------------------------| | AT COMMAND added for drivers version 2.30 | |-----------------------------------------------------------------------------| | ATB42 | Async to Sync PPP conversion in ML-PPP mode | |-----------------------------------------------------------------------------| | ATB43 | Async to Sync PPP conversion in ML-PPP+BOD mode | |-----------------------------------------------------------------------------| | ATB6 | Async to Sync PPP over X.75 Trans. | |-----------------------------------------------------------------------------| | ATB61 | Async to Sync PPP over X.75 (you need to setup a secondairy | | | device in Dialup Networking) | |-----------------------------------------------------------------------------| | ATB63 | Async to Sync PPP conversion in ML-PPP over X.75 | |-----------------------------------------------------------------------------| | ATS30 | Disconnect the connection automatically if there is no data | | | transmission in n*10 secons (n=0 to 255, default ATS30=0, it | | | will not disconnect the connection. | |-----------------------------------------------------------------------------| | ATS53 | Average Data Flow from 1000 to 7000 bytes (default=4, | | | 4000 bytes) Activate the second channel if the avarage data | | | flow is over 4000 bytes in 10 seconds. This register is only | | | available in ML-PPP BOD mode (ATB43). | |-------|---------------------------------------------------------------------| | ATS54 | Time period from 5 to 20 minutes (default 5). Disconnect the | | | second channel if the average data flow is below N bytes (set | | | by ATS53) in 5 minutes. This register is only available in | | | ML-PPP BOD mode, ATB43 | |-----------------------------------------------------------------------------| Also new: - New 'virtual' modem INF driver included Dynalink Internet Async To Syn PPP 64K, for normal ISDN access, 1 B channel (*) Dynalink Internet ML-PPP over X.75, 128K Adapter. (Your ISP must support it) Dynalink Internet MLPPP, 128K Adapter, (Normal PPP connection 2 B channel) (*) Dynalink Internet MLPPP+BOD over X.75, 128K adapter Dynalink Internet MLPPP+BOD, 128K adaper (*) Dynalink Internet PPP over X.75, 64K adapter Dynalink X.75 Transparent, 64K Adapter (BBS Access) Bugfixes / News for version 2.29 By Dennis Slagers 1. Never released for Win95. 2. Improvement for Multiprocessor platforms NT Bugfixes / News for version 2.28 By Dennis Slagers 1. Fixed bug when communicating with a USR Courier I when in HDLC mode [all platforms], thanks to Dutch testers 2. Fixed bug in Windows NT 4.0 Server which could not provide multiline access for remote clientes 3. fixed bug in Ndiswan Interface when be called [win95] 4. Fixed bug in MSN checking (Windows NT) 5. Fixed a bug for accepting an incoming call with X.75 Trans. [all platforms] 6. changed: do not reply any message when receiving FACILITY message from 'The Switch (95/NT) 7. Fixed problem in configuration utility which may not save the settings into the registry tree (win95 8. Provide new chipset control program (95/NT) Bugfixes /News for version 2.27-2.27b1 By Dennis Salgers 1. Provide the KEYPAD function for IS64PH-AN (Voice Mail / DUTCH!!) 2. Remove V.120 sync modem [all platforms] 3. Provide Kernel modem Capi 2.0 interface for Win95 4. Correction for return code for Comport within win95 2.27b1 1. Fixed bug in IINCFG.EXE for Win 3.1 2. LOG.EXE fixed for Win 3.1 did not display ISDN channels correct 3. Fixed stability problem 2186/21525 (D channel activation) 4. Improve chipset control [all platforms] 5. PCI support for Windows NT added Bugfixes /News for version 2.26b1 By Dennis Slagers - Add a ATS37=128 to send the Lower Layer Compatibility, default S37=0 (not sending the LCC) [win95] - Not sending the LLC in driver for 3.1,95 and NT - Fixed bug in V.120 when receiving a different protocol in B channel [all platforms] - Provide new chipset device driver support (PSB2115) Bugfixes / News for version 2.26 - *.inf files restyled - Solved Com5 & Com6 problem when startup Windows 95. This problem can occure when RVSCOM is installed. - Solve reboot, freeze problem when you disconnect the active connection - LOG.EXE renamed to LOG32.EXE Bugfixes / News for version 2.25 By Dennis Slagers FOR UPDATE DRIVER WIN95: PLEASE REMOVE VIRTUAL MODEMS CONNECTED TO COM5 AND/OR COM6 FOR NEW DRIVER NT: PLEASE REMOVE IS64PH IN NETWORK ENVIRONMENT Many little bugs fixed. Work on stability. No additional features released Improvement of usage virtual comports. Vcomm driver Bugfixes / News for version 2.22 By Dennis Slagers [Windows 95] - No DN1 & DN2 entries in the Device manager (ISDN Card, IS64PH ISDN adaptor Properties): these settings are replaced by AT commansd, and Ndiswan miniport (see also our FAQ (dutch) question 17)) AT&ZOm*n* (callerparty functioning; outgoing) where m* is number where n* is subaddress AT&ZIm*n* (Accepting calls on MSN ) - Callerparty / MSN accepting calls supported from Ndis Wan Miniport (see also our FAQ (dutch) question 17)) start-settings-controlpanel-system-network adapters, choose IS64PH IINWAN95 (double click), settings. Here you can specify the caller party numbers and MSN numbers for your IS64PH card With callerparty, you can specifiy your PTT phonebill on different MSN numbering. - IINCLEAN.EXE provided This program will delete the IS64PH driver files for de-installation Note: you must delete also the ISDN card in your device manager - Some other small fixes [Windows NT] - Callerparty / MSN accepting calls support from Ndis Wan Minipoort System-network-adapters-properties, choose ISDN card, Clik ok on ISA bus configuration, select in next window NDISWAN setting. Here you can configure the callerparty numbers and MSN numbers for your IS64PH card ------------------------------------------------------------------------------- Bugfixes / News for Beta 7 (2.21-B) By Dennis Slagers 09-06-97 - release: Windows 95 full version / Update version - More stability for drivers on Virtual comports / Ndiswan Miniport setting - New Modemdriver. More resultcodes are available now Please notice: you cannot see in the drivers that this the B version of 2.21 !!! Before updating new drivers: DELETE YOUR EXISTING MODEMS CONNECTED TO THE VIRTUAL COM5 OR COM6 ! DELETE YOUR NDISWAN MINIPORT CONFIGURATION IN YOUR NETWORK PROPERTIES ! For updating your existing drivers with this version: use upgrade.exe For installing the drivers for the first time: look in your manual and FAQ Dynalink BBS is also available on ISDN X.75 Our BBS can be reached at X.75 on: +31-33-2580511 to get your latest drivers Analogue (Modem V34+ / 33600 we can be reached at +31-33-2536268 Dynalink has also his own Internetdomain in The Netherlands: http://www.dynalink.nl For support about Dynalink, please contact: dynalink@2L.net For information about 2L International, please contact: info@2L.net