IBM ThinkPad                                           September 10, 2000

IBM Portable Drive Bay Device Drivers for Windows 95/98/NT and 2000
========================================================================

This package file contains the following versions:
Version 4.00c - Windows 95/98
Version 4.00f - Windows NT
Version 5.00f - Windows 2000


Installation instructions
=========================
Windows 95/98
Do not have the PC Card installed in the system at this time.
1. Start Windows 95/98.
2. Download the file to the hard disk.
3. Double-click on the file to extract it to the hard drive (the default
   directory is C:\DRIVERS\WIN\PORTBAY).
4. Insert the PC Card for the Portable Drive Bay. After the Hardware
   Wizard detects new hardware it will prompt you for the drivers for the
   new device. Change the location to C:\DRIVERS\WIN\PORTBAY\WIN95 (or
   the custom location the drivers were extracted to).
5. After the drivers are installed, it will prompt you to restart the
   system. Make sure there are no programs running, remove any diskettes
   from the floppy drive, and click "Yes" to restart the computer.


Windows NT
Do not have the PC Card installed in the system at this time.
1. Start Windows NT and Log on with Administrative privileges.
2. Download the file to the hard disk.
3. Double-click on the file to extract it to the hard drive (the default
   directory is C:\DRIVERS\WIN\PORTBAY).
4. Click on "Start -> Settings -> Control Panel -> SCSI Adapters".
5. Click on "Add". Be sure to change the location where Windows NT will
   look for the driver. Change the location to C:\DRIVERS\WIN\PORTBAY (or
   the custom location the drivers were extracted to).
6. Select "IBM Portable Drive Bay" and click "OK".
7. When prompted for the location of the drivers, change the location to
   C:\DRIVERS\WIN\PORTBAY\WINNT (or the custom location the drivers were
   extracted to).
8. After the drivers are installed, it will prompt you to restart the
   system. Make sure there are no programs running, remove any diskettes
   from the floppy drive, and click "Yes" to restart the computer.


Windows 2000
Do not have the PC Card installed in the system at this time.
1. Start or install Windows 2000. (The portable drive bay does not support
   the actual installation of Windows 2000.)
2. Log on to Windows 2000 with Administrative privileges.
3. Download the file to the hard disk.
4. Double-click on the file to extract it to the hard drive (the default
   directory is C:\DRIVERS\WIN\PORTBAY\
5. Insert the PCMCIA-IDE card into the PCMCIA slot,
6. Windows 2000 will auto detect the card and ask for drivers. Point the
   install path to "C:\DRIVERS\WIN\PORTBAY\WIN2K". If you extracted the
   files to a different directory, specify that path instead.
7. Follow the instructions on the screen.